NC Control Double Head Pipe Bending Machine, Especially used for
1. NC control for easy operation and maintenance
2.90-degrees head rotation allows for completion of 3 dimensional
part with accuracy
3. Full-cycle bending and half-cycle bending
4. Individual bending angle setting for each bend head
5. Readouts for setting of bending angles and straight distance
6. May bend 2 bend and 2 tubes simultaneously (25.4mm x 2 tubes)
7. Center distance between bends from 170 to 1900mm
8. Cost effective and high speed tube bending
9. Chosen for its unparalleled productivity, the TB series of
compression tube benders is able to make 2 bends x multiple tubes
10. Here are some of the advantages of this globally patented
1) Standard with 90 degrees head rotation for 3D bending
2) Stationary clamps to maintain the tube in position before
3) Arc movement of bending heads results in the highest production
rates available for any tube bending machine
4) Lowest setup times with quick change tooling design and readout
for length and angle settings
5) Production speed: 3.8 seconds, 25.4mm x 2t x 90 degrees, 2 tubes
at one time
1. Max. Bending capacity (mm): 38 x 2.
2. Range of radius (mm): 200.
3. Range of angle: 180 degree.
4. Bending accuracy: 0.5 degree.
5. Bending speed (sec): 70 degree.
6. Distance between 2 shafts (mm): 170~1900.
7. Horse Power (HP): 7.5.
8. Dimension (cm): 290x100x160.
9. Weight (kg): 1200.
1. Tool Kit
2. Tooling Package
3. Manual Book